LTX Patch and Splice Panel
Installation Guide
© Telect, Inc. All rights reserved. 148326 12.20.16 v2
1.509.926.6000 :: telect.com
9
Chapter 2: Installation Considerations
WARNING: Verify all connections meet requirements specified in local electric codes or operating company
guidelines before supplying power. Unit must be protected by a listed circuit breaker or branch-rated fuse
sufficient to interrupt power levels.
WARNING: Use of fully insulated tools is required when working with any AC or DC circuits.
WARNING: Fiber cables transmit invisible infrared light. To avoid eye damage or blindness, never look directly
into fibers or connectors.
CAUTION! These instructions presume you have verified that the Telect equipment being installed is compatible
with the rest of the system including power, ground, circuit protection, signal characteristics, equipment from
other vendors and local codes or ordinances.
ALERT! This product must be installed and maintained only by qualified technicians.
ALERT! Install this system according to company requirements. It is recommended to install the
system in a Restricted Access Location (RAL) where access is limited through use of tool (i.e., lock and key) or
other means of security and be controlled by the authority responsible for the location.
ALERT! Prior to panel installation, ensure there is enough space in front and rear to access cabling.
ALERT! Only use components and crimping tools approved by agencies or certifying bodies recognized in your
country or region, such as Underwriter’s Laboratories (UL), TUV, etc.
ALERT! Do not stand on fiber or fiber cables.
2.1 Inspection
When you receive the equipment, carefully unpack it and compare it to the packaging list. Please report any defective
or missing parts to Telect at [email protected] or call 1.509.926.6000. Keep all documentation that comes with
your shipment.
Please read and understand all instructions before starting installation. If you have any questions, contact Telect at
[email protected] or call 1.509.926.6000.
The panel is wrapped with a high-strength plastic. Exercise care when unpacking and setting the equipment
in place.
Telect is not liable for transit damage. If the product is damaged, please report it to the carrier and
contact Telect at 1.509.926.6000 or through email at [email protected].
2.2 Unpacking
The LTX 4RU patch and splice panel is 7" H x 17" W x 17" D and weighs 14.65 lbs.
The LTX 2RU patch and splice panel is 3.5" H x 17" W x 17" D and weighs 11.2 lbs.
The LTX 1RU patch and splice panel is 1.75" H x 17" W x 17" D and weighs 6.8 lbs.
These panels come pre-assembled as one unit.
Upon receipt of your order, carefully unpack it and compare it with the packing list and the order placed. While items
described below are a comprehensive list that includes the LTX panel, splice trays with splice sleeves, spools, brackets,
and doors, the contents of your order may vary.
