9
III. JOYSTICK SETTING
Joystick relay editing
Joystick Setting is divided into 4 parts
(1)
Joystick No. 1 Y axis
(2)
Joystick No. 1 X axis
(3)
Joystick No. 2 Y axis
(4)
Joystick No. 2 X axis
(1) Click relay table to edit relay output according to the command. Leave blank for
disable.
(2) Press
NEXT
when ready.
(3) Repeat the above process for all joystick setting.
Note
: You may return to previous step by press
RETURN
at any time.
Refer to annex I for further explanation of acc. Delay time, interlock delay time and
inching.
Relay availability for each axis is shown on the left side of table with correspondent
relay as indicated.
