English
T-Sinus 154 DSL / English / A31008-E515-A102-1-D1 / QIG_154_DSL.fm / 21.10.2003
■
Connecting
T-DSL Connection
■
Set up the T-Sinus 154 DSL at the required location.
■
For the
connection to the splitter
, insert the Ethernet cable
supplied into the socket marked T-DSL at the back of the
router.
■
Insert the other end of the cable into the splitter.
■
The network adapters in the T-Sinus 154 range are set to
recognise the router automatically, so there is no need for you
to set an SSID. When using other network adapters you should
refer to their operating instructions.
■
If the correct SSID has been entered in your PC's wireless
network adapter, the wireless link will be established
automatically once you connect your router to the mains
power supply.
LAN Connection
a) Wireless: A wireless connection is made using a wireless network adapter that must be installed in your
PC. This can be a T-Sinus 154data, T-Sinus 154card, T-Sinus 154pcicard or other 802.11g or 802.11b
compatible wireless network adapter. A wireless network is defined by assigning an identical SSID to all the
devices.
b) Wired: Your T-Sinus 154 DSL must not yet be connected to the mains, and the PC which you wish to
connect to the router with the Ethernet cable must be switched off.
■
Insert the Ethernet cable into one of the sockets marked LAN
at the back of the router. Fit the other end of the cable into the
socket on the Ethernet interface card in your PC. In this way
you can connect three more computers.
■
Do not switch the computer on until you have made this
connection.
Switching on
W
Use only the mains adapter supplied, or equipment may be damaged.
■
Ensure that the power rating of the mains socket matches the
rating for the input side of the mains adapter as shown on the
adapter label. Only plug the adapter into the mains socket
when the mains supply matches the adapter’s ratings.
■
Insert the plug on the thin cable into the connection socket for
the mains adapter on the T-Sinus 154 DSL.
■
Plug the mains adapter into a socket to which no other devices
are connected.
A connection to T-DSL is established when the T-DSL LED lights up continuously.