GSMRoute Bri Unmanaged Programmer Guide
20
Select either Get Template or Start Trace that will open Enter Destination Number box. Enter the
Data SIM number of the remote GSM-Route Bri and press OK.
Once connected the Unmanaged Programmer will either Get Template or Start Trace subject to
what was required before the enter destination number box appeared.
If Get Template was requested you will have access to the same set of facilities you would normally
get when using the Unmanaged Programmer locally. Refer to pages 6 to 12.
Note: You will find due to the Data being passed over the GSM network it takes a little longer to
upload and download templates.
If Start Trace was selected you will have access full ISDN messages and Hayes commands to GSM
modules.
At any stage you have the option to Stop the Trace and Get template or Set templates.
