GSMRoute Bri Unmanaged Programmer Guide
10
6.1
Statistics Tab
The Statistics screen displays the configuration of the GSM-Route Bri as in the diagram above. A
summary of the above screen for the GSM-Route Bri that is being analysed in this example is as
follows:-
Equipment line condition shows True if detection of terminal equipment is present, and False if not
detected.
Module 1 and Module 2 will show True if the Siemens module is detected, and false if not detected.
Module 1 SIM detected and Module 2 SIM detected – A TRUE value indicates that a SIM Card is
inserted in the corresponding module SIM holder. (In the example above the value is True
therefore SIM Cards have been detected).
Module 1 signal strength and Module 2 signal strength – This value indicates the signal strength
measured by each of the GSM modules. (A value of 10 or more is acceptable).
Network 1 calls and Network 2 calls show the amount of calls made over the chosen network.
Network 1 calls-busy and Network 2 calls-busy, show the amount of calls that went over the PTT
due to the Modules being busy.
Network 1 calls-No network and Network 2 calls-No network show the amount of calls due to no
network coverage.
Network 1 minutes and network 2 minutes show the amount of minutes routed over the chosen
network.
