4
CELL ROUTE-GSM
Getting Started
Setting up the terminal
Remove the CELLROUTE-GSM from the packaging, and proceed as
follows:
Warning! To avoid damage do not connect power until you have
inserted the SIM card
•
Install the SIM card. (
Making sure the PIN lock is deactivated
if
applicable).
•
Install the CELLRoute-GSM in preferred location following guidelines.
•
Connect Power to the CELLRoute-GSM using Power Supply Provided.
•
Connect a telephone to the CELLRoute-GSM.
•
Check Signal Strength
•
Make a test call
Note: The cellRoute-GSM unit must be connected to the mains power
and allowed to charge for a minimum of 30 minutes before use.
However for maximum battery standby performance the CellRoute-
GSM must be connected to the mains for a minimum of 4 hours.
Installing the SIM card
Slide open the SIM cover.
Slide back the SIM door and lift it up.
Slide the SIM into the SIM door making
sure that the clipped corner of the SIM card
lines up with the clipped corner of the SIM
Holder.
Close the SIM door.
Slide SIM door to lock the SIM in place.
Then replace SIM cover.
