44
www.behnke-online.de
GB
Mounting
Instructions for Behnke 20-0001B-IP, 20-0014B-IP, 20-0016B-IP
“Click”
Electronics box
Module housing
cover
Modu
le hou
sing
2
Unpack and disassemble basic electronics
20-0001B-IP, 20-0014B-IP. Immediately upon
receipt, check that all required parts (instruc-
tions, name tag inserts) are present.
For further mounting of your intercom stations
the electronics box and the module housing
must be separated. To do this, proceed as
described below. Be sure to observe the sketch
when doing so.
Carefully lever the electronics box out of the
module housing using a suitable screwdriver
and place it on a suitable surface. Do not open
the electronics box. Loosen the cover of the
module housing by hand and place it on a suit-
able surface. For basic electronics 20-0014B-IP,
the module housing cover is omitted.
!
Do not loosen the 4 screws
( )
of the
electronics box!
Do not open the electron-
ics box. The device can be destroyed!
