13
P1
o
P2
**
WIND
alarm angle
*
x8
TEMPERATURE
or SNOW
alarm angle
*
x9
Reset default
angles
*
x10
Change of the automatic alarm angles
1.1
4.5
Use the following procedures to change the default angles of the pergola slats associated with the wind alarm (
33%
) or the temperature/snow alarm (
66%
).
The system must have been configured and at least one transmitter memorized.
Activation/
deactivation of the
RAIN sensor
Deactivation
Press the “
STOP
” button of a
memorized 7/42 or 3-channel
transmitter for
10 s.
The buzzer
emits
2 beeps
.
L2
flashes once
every
2 seconds
.
Activation
Press the “
STOP
” button of a
memorized 7/42 or 3-channel
transmitter for
10 s.
The buzzer
emits a continuous sound for
4
seconds
.
STOP
L2 flashes
once every 2 s
(10 s)
continuous
sound 4 s
STOP
(10 s)
HOLD
complete
closing
complete
closing
Put the slats to
the desired angle,
then:
(5 s)
desired
position
*
The buzzer will make a beep each time the button is pressed. ** According to the motor control mode
1 s
continuous
sound
2 s
3 s
continuous
sound
continuous
sound
Press
P1
or
P2
(**) as many times as required by the type of desired memorization and hold the last time.
The buzzer emits a continuous sound.
