10
Radio code deletion
1.1
3.2
P1
or
P2
If the system is configured as
pergola with 2 independent motors
, use
P1
to delete associations with
motor 1
and
P2
for
motor 2
.
Carry out deletion with either
P1
and
P2
if the code is associated with both motors.
In the other configurations deletion is possible using either
P1
or
P2
.
Press
P1
or
P2
(**)
5 times
and hold. The buzzer emits an intermittent sound. Press the button of the transmitter relative to the code to be deleted within 10
seconds. Successful deletion is indicated by a continuous sound of the buzzer.
*
The buzzer will make a beep each time the button is pressed. ** According to the motor control mode
ALL THE RADIO CODES
*
6x
(10 s)
continuous
sound
...
intermittent
sound
Press
P1
or
P2
6 times
and the sixth time
hold for 10 seconds
. The buzzer emits a fast intermittent sound. Release when the sound becomes continuous.
x 3
Remote deletion of a radio code
Note:
The button P3 is located inside the transmitter. The added radio code will have the same functions as the
code used for memorization. This procedure is compatible with any type of transmitter.
Press button
P3
of the
memorized
transmitter and hold. The buzzer emits a
continuous sound. Press a button relative to an
already memorized
code. The
buzzer stops for 1 second and then starts the continuous sound again. Press the
button relative to the
new
code to be memorized. Successful memorization is
indicated by the intermittent sound of the buzzer.
...
P3
< 5 s
intermittent
sound
To be deleted
1 s
...
P3
New
< 5 s
continuous
sound
Memorized
< 5 s
continuous
sound
Memorized
Memorized
Note:
The button P3 is located inside the transmitter. If the radio code was
associated with both motors, carry out the deletion twice.
Press the button
P3
of the
memorized
transmitter
3 times
and hold. The buzzer
emits a slow intermittent sound. Press a button relative to the code
to be deleted
within 5 seconds. Upon completion of deletion, the buzzer will stop.
1.1
3.3
3.4
Remote memorization of other radio codes
TYPE OF DELETION
P1
or
P2
**
SINGLE RADIO CODE
*
5x
Press the button of the transmitter
relative to the code to be deleted.
HOLD
...
continuous
sound
