14
(CH4)
In case of using
bidirectional transmitters
it’s possible to receive a feedback about the
door status, shown by means of the transmitter’s LED:
- Red led:
open door
- Blue led:
closed door
- Flashing led:
missing feedback
Warning:
the remaining free buttons of the transmitter should be memorized using the
procedure
4.1
.
TRTXI868xx04
TRTXP868x04
DOOR STATUS REQUEST (“ASK”)
ASK
SINGLE CHANNEL: DOOR STATUS REQUEST (ASK)
4.2
P1
TYPE OF MEMORIZATION
P1
ASK function
*
x7
Press any button of TRTXP or
CH4 of TRTXI transmitter to
memorize.
keep it pressed
continuous sound
intermittent sound
...
intermittent sound
ON
2
1
DIP1 DIP2 Sensitivity
Off
Off
High
On
Off
Medium
Off
On
Low
On
On
Extra-low
TVSSH868A01
The garage door must be completly close.
Only for TVSSH868A01
NOTE: It is not necessary if you use BST25S (with its DIP1=OFF)
The wireless shock sensor (optional) detects any attempt of breaking or entering and
send a signal to the control unit that will activate the speaker (optional) for 1 minute.
L6 flashes. It is possible to set the sensor sensitivity by means of the dip switches
(see at side). Sending any opening or closing door command will stop the alarm.
Warning:
optional speaker must be connected!
ALARM FUNCTION: SHOCK SENSOR MEMORIZATION
4.3
P1
TYPE OF MEMORIZATION
P1
Shock sensor
*
x8
Activate the shock sensor
to memorize.
keep it pressed
continuous sound
...
ACTIVATE THE
SHOCK SENSOR
