Teleco Motosat 85, Installation Manual And User'S Manual

Page: 6 / 24

Cut the antenna cable to the proper length and
apply the connector as shown on Figure. Make
sure no wire of the braiding touches the core of
the cable
Introduce the coaxial cable in the special
slot (A) and lead it out of rear bottom side
of Motosat (B)
Engage Motosat in the antenna support
tube until the tube holes are aligned with
the Motosat holes.
Fix Motosat to the antenna support tube
with the special screws.
Connect the cables as
shown in figure
Verify that the
coaxial cable
does not
obstruct the
screw hole.
Green
White Brown
Coax
Receiver Sat
5