Teleco Flat Sat Classic Smart 65, Installation And Operation Manual

Page: 19 / 32

To switch the system back on just press the key (1) again.
Safety connection: correct connection of the green safety wire ensures that the antenna
is automatically closed and the TV switched off if the vehicle starts moving.
Make sure the green cable has been connected as indicated in the installation guide.
Using the TV to watch other sources (terrestrial digital, DVD etc.)
Use the INPUT (3) key on the remote control to select the source you intend to view on the
TV. If you decide to go back to watching Satellite channels, select the DVB-S2 source with
the INPUT (3) key of the remote control.
Viewing other sources with the antenna closed
Press the key (2) to switch on the TV: use the INPUT key (3) of the remote control to select
the source you intend to watch on the TV.
Fault display
Should any faults occur, these are displayed by the antenna animation on the TV screen.
1) Before performing antenna tracking operation, make sure you
have positioned your vehicle so that the view towards the South
(where Satellite signals come from) is free from any nearby
obstacle (trees, houses, etc.). This way, the antenna will be free
to receive signals coming from the satellite.
2) It is also important to know that satellites do not transmit with
the same intensity throughout Europe, so if you are outside the
reception area, your Flat Sat Elegance Smart search might be
unsuccessful. The reception areas for each Satellite can be found
on the main magazines dealing in this line of business. Also
remember that the larger the dish, the more reception area is
available.
18