A few seconds later the satellite search menu disappears and the TV automatically displays
the channel that was selected on the DVB-S2 satellite receiver incorporated in the TV.
If you change channel on the receiver and choose a TV programme transmitted by a different
satellite, the Flat Sat Elegance Smart will immediately start searching for the new satellite.
Note:
during the satellite search phase the user can return to the satellite receiver menu
simply by pressing one of the keys (4).
Note:
with every search, the antenna automatically saves the coordinates of each tracked
satellite in order to speed up the process when switching from one satellite to another or if
switching the system back on after parking the antenna. Note that this memory is wiped every
time the vehicle engine is started (as long as the green safety cable is connected).
Closing the antenna with shutdown of the Flat Sat Elegance Smart
Once you have stopped watching satellite channels press key (1).
The TV displays the Control Unit menu and an info-graphic showing the antenna being closed.
Once the antenna closure procedure has been completed the message “P OK” appears.
After a few seconds the Control Unit and TV shut down automatically.
17
Summary of Contents for Flat Sat Classic Smart 65
