14
(CH4)
In case of using
bidirectional transmitters
it’s possible
to receive a feedback about the door status, shown by
means of the transmitter’s LED:
- Red led:
open door
- Blue led:
closed door
- Flashing led:
missing feedback
Warning:
the remaining free buttons of the transmitter
should be memorized using the procedures
4.1
,
4.2
or
4.3
.
4.8 Single channel: door status request (“ASK”)
TRTXI868xx04
TRTXP868x04
DOOR STATUS REQUEST (“ASK”)
ASK
4.7 Alarm function: shock sensor memorization
The wireless shock sensor (optional) detects any
attempt of breaking or entering and send a signal
to the control unit that will activate the speaker
(optional) for 1 minute. It is possible to set the
sensor sensitivity by means of the dip switches
(see at side). Sending any opening or closing door
command will stop the alarm.
Warning:
optional speaker must be connected!
ON
2
1
Press
P1
eight times
and keep it pressed.
The buzzer emits a continuous sound.
Activate the shock sensor
.
Once the memorization is successfully completed,
the buzzer emits a fast intermittent sound.
continuous sound
...
( )
keep it pressed
intermittent sound
DIP1 DIP2 Sensitivity
Off
Off
High
On
Off
Medium
Off
On
Low
On
On
Extra-low
TVSSH868A01
ACTIVATE THE
SHOCK SENSOR
Only for TVSSH868A01
(with BST25S is not
necessary the shock sensor memorization).
The garage door must
be completly close.
8x
P1
Press
P1
seven times
and keep it pressed.
The buzzer emits a continuous sound.
Press
any button
of
TRTXP
or
CH4
of
TRTXI
.
Once the memorization is successfully completed,
the buzzer emits a fast intermittent sound.
continuous sound
...
( )
keep it pressed
intermittent sound
button to
memorize
7x
P1
