DIGITS
TG-TX-MNL8, TG-TX-MNR8: BUTTON TO PRESS
TG-TX-MXL12, TG-TX-MXR12: BUTTON TO PRESS
1
1
1
2
2
2
3
3
3
4
4
4
5
5
5
6
6
6
7
the right start 1
7
8
the right start 2
8
9
the right start 3
9
0
the right start 4
10
Show channel
1. Make sure that the stop button is pressed.
2. Pull out the stop button.
The top LED lights (green when the battery capacity is good, red when the battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The top LED flashes (green when the battery capacity is good, red when the battery capacity is poor)
when in menu mode.
6. Press button 4.
7. The number of times that LED1 flashes, equals the 1st digit in the channel. The number of times that
LED2 flashes, equals the 2nd digit.
Example: Channel 54- LED 1 flashes 5 times. LED 2 flashes 4 times.
8. Turn the transmitter off to exit.
-
48
-
Summary of Contents for TG-R9-1
