tablish the L2TP tunnel.
• Check the router’s L2TP configuration.
• Follow the instructions given in the "Monitoring" section.
Steady Green
The L2TP tunnel has established. The device is ready to operate
normally.
Flashing Green
There is traffic through the WWAN interface.
Steady Yellow
The device is updating the firmware.
The meaning of the STATUS LED after a startup or rebooting process once the firmware has been updated is as fol-
lows:
• On startup, it lights up for a moment in yellow.
• While the application starts up, it flashes in green.
• When the application is ready, it stays green.
If there is any problem during start-up, the LED lights up in red for a few seconds and then starts flashing in green.
Teldat S.A.
4 Appendix
Teldat-3Ge Quick Guide
29
