;
group 4
; -- L2TP group configuration --
pseudowire ETH-ANT-MON
initiate-to 172.24.78.32
request-dialin
interface rcellular4
hello 9
exit
;
group 5
; -- L2TP group configuration --
pseudowire ETH-ANT-PPP
initiate-to 172.24.78.32
request-dialin
interface rcellular5
hello 9
exit
;
group 6
; -- L2TP group configuration --
pseudowire ETH-ANT-UPG
initiate-to 172.24.78.32
request-dialin
interface rcellular6
hello 9
exit
exit
;
protocol sip
; -- SIP protocol configuration --
application address 172.24.78.31
application gateway
exit
;
feature tftp
; -- TFTP user configuration --
server file-system DSK
server enable
exit
;
feature wrr-backup-wan
; -- WAN Reroute Backup user configuration --
pair 1 primary interface ethernet0/0 secondary interface ppp1
pair 1 inverse-wrr
;
enable
exit
;
dump-command-errors
;
end
You can use the GSM telephone line in each Teldat-3Ge to execute voice calls using a suitable router configuration.
To do this, you only have to add a
dial-peer
with the IP address for each Teldat-3Ge . You also have to add the
sip-
port
parameters and the
localphone
to the DHCP configuration destined for each Teldat-3Ge . When this configura-
tion is active, if one of the Teldat-3Ge GSM lines defined in the first
dial-peer
is busy, the router sends the call to the
Teldat-3Ge defined in the next
dial-peer
and so on.
The following console shows an example of this type of voice backup configuration when three Teldat-3Ge devices
are being used:
telephony
; -- Telephony configuration --
dial-peer 1 sip
description “Outgoing external calls through the
Teldat-3Ge
1”
no vad
4 Appendix
Teldat S.A.
26
Teldat-3Ge Quick Guide
