Note
The device has been designed to allow brackets to be attached to the front or rear of the router
chassis.
3.3.1 Standalone
RS1800 series devices can be placed as standalones on a flat, stable surface. The adhesive rubber feet must be
stuck to the underside panel to prevent the router from sliding.
Make sure there is enough space around the router (for ventilation purposes) and check that the power cord and
data cables can easily reach it.
3.3.2 Wall mounting
The RS1800 series device cannot be mounted on a wall.
3.4 Plug-in Modules
The RS1800 series does not have plug-in modules.
3.5 Power source
The RS1800 series router is powered through an external AC/DC power adapter.
Warning
The equipment must be used with the power supply provided by the manufacturer.
Workplace conditions. Main characteristics
• Avoid humid and/or dusty locations.
• Direct exposure to sunlight and other heat sources should be avoided. The device should not be placed amongst
papers, magazines or other elements that could hinder natural air circulation.
• The device should not be placed close to strong electromagnetic fields (such as speakers, engines, etc.).
• Knocks and/or strong vibrations should be avoided during transport, operation and storage.
Warning
3.5.1 Power source
To avoid electric shocks, residual current circulation and other unwanted effects that affect communications, the fol-
lowing is recommended:
Warning
For safety and EMC purposes, the external power supply must be connected to a grounded power out-
let.
3 Components and Power Supply
Teldat S.A.
12
RS1800 series
The electric current in power cables, telephone lines and communication cables is dangerous. To pre-
vent electric shocks, before installing, handling or opening the equipment covers, connect and discon-
nect the cables following the steps set forth in
on page 13 and
on page 13.
To connect the power supply to the device, please follow the steps set out in
on page 13.
