The Teldat 4Ge LEDs are shown in Figure 6. The table below contains a description of each:
LEDs table
LED
Status
Description
LAN
Tricolor
Green -> connected. Blinking: con-
nection data activity.
Amber -> blinking: auto-test.
Red -> disconnected.
PWR
Monochrome green
Device ON/OFF. This lights up when
connected to the power source.
W
Tricolor
Off -> system stopped.
Red -> interface unavailable because
it is installing, not enabled (shutdown)
or due to auto-test failure.
Yellow -> idle.
• Rapid blinking. It has not registered
in the network or the quality is in-
sufficient.
• Slow blinking. GSM connection
(GPRS).
• Steady. WCDMA (UMTS/HSDPA)
connection.
Green -> connected. Blinking: con-
nection data activity.
3.2 Assembly
3.2.1 Mounting in rack
The Teldat 4Ge cannot be mounted in a rack. However, there are other types of mounting.
3.2.2 Standalone
The Teldat 4Ge can be placed as a standalone device on a flat, stable surface.
Make sure there is enough space around the router for ventilation purposes and that electricity cables can reach it.
3.2.3 Wall mounting
The Teldat 4Ge can be mounted on the wall.
We recommend the following accessories for wall mounting, valid for solid and Gypsum board (plaster) walls:
• 2 screws: [Coach Screw Head 90 Degrees. 3.5x30].
3 Components and Power Supply
Teldat S.A.
8
Teldat 4Ge Router
There are two slots on the underside of the device, used to fix it to the wall. You can see this in
page 6.
