manualshive.com logo in svg

Telco Systems Metrobility 10/100 AutoTwister 2643-13-01, Installation & User Manual

Share
Download
Telco Systems Metrobility 10/100 AutoTwister 2643-13-01 Installation & User Manual Download Page 21

Metrobility 10/100 AutoTwister       21

Singlemode Fiber Optic Interface — extended long haul distance support 

(2643-1J-01)

Connector ________________________________________________________ SC

Wavelength ___________________________________________________ 1550nm

RX Input Sensitivity ____________________________________-36 dBm minimum

Output Power  _______________________________ -3 dBm to +2 dBm (9/125 µm)

Typical Link Budget ______________________________________________ 37 dB

Supported Link Length ______________________________up to 100km full duplex

Cable Type  _______________________________________________9/125 µm F/O

Singlemode BWDM Fiber Optic Interface 

Connector ________________________________________________________ SC

Supported Link Length _______________________________up to 20km full duplex

Cable Type  _______________________________________________9/125 µm F/O

RX Input Sensitivity ____________________________________-32 dBm minimum

Output Power  _______________________________-15 dBm to -8 dBm (9/125 µm)

Typical Link Budget ______________________________________________ 20 dB

(2643-1X-01)

TX Wavelength  ____________________________________________ 1550nm

RX Wavelength ____________________________________________ 1310nm

(2643-1Y-01)

TX Wavelength  ____________________________________________ 1310nm

RX Wavelength ____________________________________________ 1550nm

Data Rate

Data Rate   _________________________________________ 10/100Mbps (Copper)

 

  _____________________________________________ 100Mbps (Fiber)

Power

Input  _____________________________________________

90-260V AC 50/60 Hz

Output ________________________________________ 5V @ 1Amp, 5W

Environmental

Operating Temperature ________________________________________ 0° to 50° C

Storage Temperature ________________________________________ -25° to 70° C

Relative Humidity

 _______________________________5% to 95% non-condensing

Physical Case  _____________________________ Fully enclosed metal construction

Dimensions   ___________

4.83" L x 3.26" W x 1.71" H (12.3 cm x 8.3 cm x 4.3 cm)

Weight  (including power supply) ______________________________ 3 lbs, 1.36 kg

Summary of Contents for Metrobility 10/100 AutoTwister 2643-13-01

























Reviews:

No comments

Brands by name

Popular brands

Load more brands