Telair SILENT 12000 HT, Manual For Installation And User Manual

Page: 9 / 28

9
GB
from inside the camper - of the 4 threaded
fixing seats.
The arrow in fig. 7 indicates direction of
forward drive.
The framed perimeter
support seal must be aligned with the
edge of the hole (fig 7 ref. 1).
Working from inside the vehicle, shift the air
conditioner until the four fixing threads are
aligned with the square 395 x 395 mm
opening of the hole on the roof.
Line the four external sides of the connecting
duct with adhesive insulating tape so that it
adheres to the folded fixing edge (fig.
8
).
Working from inside the camper, insert the
connection duct at the base of the air
conditioner; use the four self-tapping screws
L.12 mm (supplied). Align the duct with the
rectangular hole of the ventilator (fig.
9)
. The
arrow in figure 9 indicates the direction of
forward drive.
Fit the air/block tunnel with the supplied
screws (fig.
10
)
. It is important to attach the
screws according to a
driving torque of
2 Nm
, that is,
0.2 kgm.
You are advised to use a torque wrench.
Incorrect tightening can
damage the support base of the air
conditioner, compromise the seal and
cause loud noise inside the vehicle when
the conditioner is in operation.