Telair SILENT 12000 HT, Manual For Installation And User Manual

Page: 10 / 28

10
GB
Cut the two sides of the connector duct (fig.
11
) so that they do not protrude from the
tunnel edge.
Fold the two long sides of the connector duct
(fig.
12
) so that they are horizontally in
contact with the horizontal surface of the
tunnel.
The resulting connection is shown in Fig.
13
.
4.4 Connecting the power lead
Connect the 230 Vac power lead to the one
on the just-installed conditioner (fig.
14
).
Observe the wire colours:
blue wire: neutral
brown wire: phase
yellow-green wire: earth ( )
Check that the power lead is not
excessively long as it could obstruct the
intake grilles.
4.5 Installing the diffuser
Remove the two adjustable airflow director
fins from the diffuser (fig.
15
)
Connect up the panel coupling (
Fig
. 16
)
and
fasten the diffuser with the 4 self-tapping
screws L. 25 mm (fig.
17
)