www.tekvox.com
1201-N+
79033-N+ User Manual
4.3 Connection Procedure Steps
1)
Connect HDMI source devices (e.g. Blue-ray DVD) to 1~5 HDMI input ports with HDMI cable.
2)
Connect a VGA source device (e.g. Laptop) to VGA input port with VGA cable and VGA audio
input port with audio cable.
3)
Connect a HDMI display device to HDMI output port with HDMI cable.
4)
Connect HDBaseT Receiver to HDBT output port with twisted pair.
5)
Connect speaker, headphone or AV amplifier to AUDIO OUTPUT port.
6)
Connect control device (e.g. PC, control system) to the TCP/IP port, the Scaler Switcher can be
controlled via GUI.
7)
Connect control device (e.g. TekTouchPad) to the RS232 port of the Switcher or the HDBaseT
Receiver (bi-directional RS232 control, either end is available).
8)
Connect IR receiver to the IR EYE port. The Switcher can be controlled via IR remote.
9)
Both the Switcher and the HDBaseT Receiver have IR IN and OUT. When one model is connected
with IR receiver, the other model should connect with an IR transmitter.
For example: When “IR IN” of the Scaler Switcher connects with an IR receiver, the IR
transmitter must connect to “IR OUT” of the HDBaseT Receiver.
The IR signal can be transmitted bi-directionally between the Scaler Switcher and the
HDBaseT Receiver.
10)
Connect DC24V power adaptor to the power port (HDBaseT Receiver can be powered by the
Scaler Switcher with PoH function).
Note:
If the power adapter is connected to HDBaseT Receiver, the Scaler Switcher can’t be
powered from the HDBaseT Receiver.
4.4 Connection of Microphone Mixer
The TEK 1201-N+ only provides a line-level stereo input that can be used to connect to a microphone
mixer with line-level out. This input is a stereo 3-Pin phoenix connector and is labeled as “MIX”.
4.5 Application
The TEK 1201-N+ is ideal for both small conference room and typical classroom room applications,
especially when there is no need for an equipment rack. The switcher can be mounted under a
conference table, on a wall, or in a teacher’s desk. It can also be easily mounted into a rack with its
rack-mount ears. When used with a TEKVOX Drop-In™ system, a low cost and complete mediated
classroom system can be created. Placing the switcher in “Auto-Switching” and enabling the “Output
CEC Auto Power” modes allows the switcher to automatically power on and off a display with CEC
control when video is detected at any of its video input connections. This feature allows the TEK 1201-
N+ to be used for both simple conference rooms as well as collaboration tables.
