www.tekvox.com
PTZ Cameras
79068 User Manual
3.3.6 Version
Navigate to “Version” in the Main Menu, then press
[HOME]
to enter the Version Information menu
MCU Version
: Version information for the camera
microcontroller unit (MCU)
Camera Version
: Version information for the camera hardware
& software
AF Version
: Version information for the camera’s Auto-Focus
(AF) software
Lens
: Camera optical lens zoom
3.3.7 Restore Default
Navigate to “Restore Default” in the Main Menu, then press
[HOME]
to enter the Restore Default
menu
Restore Default
: YES / NO
Restoring default settings does not restore video format
Note
: Camera address will default to 1 after settings are
restored, regardless of previous setting. To ensure remote
control continues to control camera, press
[1]
in the
“Camera Select” section of the remote control to set it to
control Camera 1.
4. Network Connection
4.1 Connecting Mode
Direct Connection
: Connect camera to computer via network cable
Internet Connection Mode
: Connect the camera to the Internet via a router or switch. Users can log
in to the device via an internet browser.
Note
: Avoid routing power and network cables through areas in which they can be easily touched, in
order to prevent errors from unstable cable connections.
The computer must have a network segment the camera IP address belongs to. The device will not
be accessible without the segment (i.e. If the camera default IP address is 192.168.5.163, then
segment 5 must be added in the computer). Specific steps are as below:
