www.tekvox.com
PTZ Cameras
79068 User Manual
3. Application Instructions
3.1 Video Output
3.1.1 Power-On Initial Configuration
When powered on, the IR indicator light will flash and configure the camera to its default
configuration. When the camera returns to the HOME position (middle position for P/T), the lens
finish will zoom in/out and finish auto-testing. When completed, the IR LED will also stop flashing. If
the preset “0” is set, the camera will rotate to the “0” preset position after initial configuration.
3.1.2 Video Output
31.
Connect to the video output cable
: Select the output mode according to the machine model
(Figure 1.4.1).
32.
Network output
: Connect this product and your computer through a network cable and open a
web browser. Then, enter the camera IP address (factory default 192.168.5.163) in the address
bar, and input a username and password (factory default are “admin”) in the login page. Finally,
enter the preview page, and the image will appear.
(Note: If you forget your username, password, or IP address, you can manually restore the
default using the remote controller key combination * #)
33.
3G-SDI output or DVI (HDMI) output
: Connect the monitor with the corresponding video output
interface, then the monitor output image.
