Tektronix TMSMPH4 mPGA479, Instruction Manual

Page: 26 / 48

Maintenance and Shipping
12
TMSSY2 mPGA479 Socket Hardware Support
Follow steps 1 through 4 for short-term storage of the probe head:
CAUTION. To prevent static damage to the microprocessor, the probe adapter, the
probes, and the module, handle components only in a static-free environment.
Always wear a grounding wrist strap, heel strap, or similar device while
handling the microprocessor and probe adapter.
1.
Power off the SUT and unplug the AC power cord on the preprocessor unit.
It is not necessary to power off the logic analyzer.
2.
To remove the probe head, reverse the probe installation instructions
(starting on page 7) that apply to your heat sink attachment hardware.
CAUTION. To prevent damage to the sensitive probe head cables, you must
position the cables so that they are not pinched or contacting any sharp objects.
When you fold the cables, use a minimum radius of 0.25 (0.64 cm) at the fold.
3.
Using antistatic nongenerating tape, tape the pin-protector board onto the pin
header on the bottom of the probe head.
4.
Store the probe head in an antistatic bag.
Short-Term Storage