Tektronix TMSMPH4 mPGA479, Instruction Manual

Page: 17 / 48

Getting Started
TMSSY2 mPGA479 Socket Hardware Support
3
Connect the P6960 Probes and TMSCAB1 Cables
Use the P6960 probes and the TMSCAB1 cables to connect to the TLA7Ax4
logic analyzer modules to the preprocessor unit.
NOTE . If you need to attach labels to TMSCAB1 cables, refer to Appendix 30.
Modules
TMSCAB1
cables P6960
probes
Description
Support
Software
4 5 (M,S1,S2) 6 (M,S3) Does not acquire auxiliary
common clock signals PUB32G15
M
A
S
T
E
R
S
L
A
V
E
2
S
L
A
V
E
1
S
L
A
V
E
3
TMSCAB1 cables (5)
P6960 probes (4)
P6960 probes (2)
Figure 2: Module configuration
1.
From the Master module, match the label on the TMSCAB1 cable with the
corresponding connector label on the preprocessor unit and connect the
cable. The TMSCAB1 cable connector is keyed for correct alignment to the
preprocessor unit.
2.
Use care to evenly tighten both screws on the module end of the probes or
cables until they are snug. First slightly tighten both screws, then snug each
screw to 4 in-lbs (max).
3.
Repeat step 1 to attach the TMSCAB1 cables with the Slave1 and Slave2
modules.
TMSCAB1 Cables