Tektronix RTPA2A, Instruction Manual

Page: 17 / 44

Getting Started
RTPA2A Instruction Manual
7
Installing the Probe Adapter
Figure 2 shows the TekConnect probe adapter, standard accessories, and location
of the probe inputs.
You must allow for airflow clearance for the probe adapter; see page 22 for the
required clearance.
USB*
P7000 Series
TekConnect
probe
USB
cable
Power cord
DC power
supply
Circuit
under test
50
Ω
SMA-to-N
cable
Signal in*
(RF input)
RTPA2A
TekConnect Probe
Adapter
* For USB and RF connector locations
to the spectrum analyzer, see your
spectrum analyzer user manual.
Real--Time
Spectrum Analyzer
Figure 2: Probe adapter inputs and outputs
Installing the probe adapter consists of the following steps:
1. Install the power cord.
2. Install the power supply cable.
3. Install the USB cable (also to the spectrum analyzer).