Service Information
P6133 Instruction Manual
13
Maintenance
Use the following procedures to clean and maintain the P6133 probe.
To remove accumulated dirt from the probe exterior, use a soft cloth dampened
with a nonresidue cleaner, preferably isopropyl alcohol. In particular, avoid
solvents such as benzene, toluene, xylene, or acetone.
Modular construction has been used to simplify repair. The probe tip assembly,
compensation box, and cable are available as separate units through your local
Tektronix field office or representative. Individual components within the
compensation box are not replaceable. See page 15 for a list of replaceable parts.
The probe tip assembly unscrews from the probe head/cable assembly. To
disconnect the cable from the compensation box, do the following:
1. Unscrew the compensation box retainer nut about two complete turns.
2. Pull out the cable until it separates from the compensation box.
3. To reconnect the cable to the compensation box, implement the above
procedure in reverse.
Cleaning
Probe Module
Replacement
