SMU Potentiostats and EC-UPGRADE Kit Quick Start Guide
12
071347302 / March 2020
3. Enter the number of potential vertices. You can define two, three, or four vertices.
4. The vertex selections will change based on the number of vertices you choose. Select each vertex to enter
its potential. For this example, you will define four vertices.
Figure 17: Scan Settings menu, defining four vertices
5. Enter each vertex value in the range of ±20 V.
After you define the vertices, select the potential reference: Eref or Eoc. If you select Eref, the applied potential
is relative to the potential at the reference electrode. If you select Eoc, the applied potential is relative to the
open-circuit potential of the cell (Eoc), which is measured immediately before the scan begins.
To select the potential reference:
1. From the Scan Settings menu, select
Reference
.
Figure 18: Scan Settings menu, selecting Reference
2. Select
Eref
or
Eoc
.
