Commands Listed in Alphabetical Order
Syntax
WFMOutpre:NR_Pt?
Related Commands
,
,
,
,
Examples
WFMOUTPRE:NR_PT?
might return
:WFMOUTPRE:NR_PT 10000
indicating that
there are 10000 data points to be sent.
WFMOutpre:PT_Fmt? (Query Only)
Returns the point format for the outgoing waveform speci
fi
ed by the
command. Returned values are either ENV, which indicates envelope mode
format in which the data is returned as a series of min/max pairs, or Y, which
indicates normal waveform points. The query command will time out and an error
will be generated if the waveform speci
fi
ed by
is not turned on.
Group
Waveform Transfer
Syntax
WFMOutpre:PT_Fmt?
Related Commands
Examples
WFMOUTPRE:PT_FMT?
might return
:WFMOutpre:PT_Fmt ENV
indicating that
the waveform data is a series of min-max pairs.
WFMOutpre:PT_Off? (Query Only)
The set form of this command is ignored. The query form always returns a 0, if
the waveform speci
fi
ed by DATA:SOUrce is on or displayed. If the waveform
is not displayed, the query form generates an error and returns event code 2244.
This command is for compatibility with other Tektronix oscilloscopes.
Group
Waveform Transfer
Syntax
WFMOutpre:PT_Off?
Related Commands
MSO4000 and DPO4000 Series Programmer Manual
2-523
Summary of Contents for DPO4000 Series
