Commands Listed in Alphabetical Order
NOTE.
This command does not affect IEEE Std 488.2-1987 Common Commands
(those starting with an asterisk). This command does affect the verbose state
of both the USBTMC and VXI-11 interfaces. Refer to the Introduction for
information.
Group
Miscellaneous
Syntax
VERBose {OFF|ON|<NR1>}
Related Commands
,
Arguments
OFF
sets the Verbose state to false, which returns minimum-length keywords
for applicable setting queries.
ON
sets the Verbose state to true, which returns full-length keywords for applicable
setting queries.
<NR1>
a 0 returns minimum-length keywords for applicable setting queries; any
other value returns full-length keywords.
Examples
VERBOSE ON
enables the Verbose state.
VERBOSE ?
might return
:VERB 0
indicating that the Verbose state is disabled.
*WAI (No Query Form)
Prevents the oscilloscope from executing further commands or queries until all
pending commands that generate an OPC message are complete. This command
allows you to synchronize the operation of the oscilloscope with your application
program.(See page 3-7,
The
*WAI
command will stop execution until certain oscilloscope operations are
complete. (See Table 3-3 on page 3-7.)
Group
Status and Error
Syntax
*WAI
Related Commands
,
2-508
MSO4000 and DPO4000 Series Programmer Manual
Summary of Contents for DPO4000 Series
