Tektronix BPA105, User Manual

Page: 61 / 96

Reference
BPA105 Bluetooth Protocol Analyzer User Manual -- COMPANY CONFIDENTIAL
1/2001
2- 11
Use the following procedure to enable decryption on the Bluetooth Protocol
Analyzer:
1.
Select
Acquisition
>
Setup
in the Bluetooth Protocol Analyzer menu bar.
2. Select Enable Decryption in the Acquisition Setup dialog box; then click
the Decryption button.
3. In the Decryption dialog box (Figure 2--9 on page 2--9), make your other
selections from the following:
H
Authentication/Pairing. Choose either Authentication (default) or Pairing
and follow these guidelines:
H
If using Authentication, enter the LinkKey.
H
If using Pairing, enter the PIN. The BPA100 Protocol Analyzer
derives the LinkKey from the PIN. If entering the PIN in ASCII,
click the ASCII check box.
H
Master: Enter the Master BD Address.
H
AM Address specific: Select Single session (default) or Multi session.
H
LinkKey/PIN: See Authentication/Pairing above.
H
Slave BD Address: Enter the address.
H
AM Address: Make a selection.
4. Click OK .
Enable Decryption
Procedure