Reference
BPA105 Bluetooth Protocol Analyzer User Manual -- COMPANY CONFIDENTIAL
1/2001
2- 5
Defining Bit Errors.
Perform the following steps to define bit errors.
1.
In the Sequences Name column, type in a name for the error sequence you
are defining. You can define up to four sequences.
2.
Enter a Timeout value between 0 and 100. The Timeout value determines
how long the application looks for the next pattern in a sequence. Enter the
value as the number of Bluetooth time units. A Bluetooth time unit is
625
s.
3.
Click in the Status column and select an entry from the drop-down list box:
H
Off: Disables the highlighted sequence so it will not be recognized by
the Bluetooth Protocol Analyzer.
H
Single: Only the first sequence whose patterns occur in the listed order
will be marked in the Bluetooth Protocol Analyzer display.
H
Repeat: Whenever the patterns in the specified sequence occur in order,
they will be marked in the Bluetooth Protocol Analyzer display.
H
Number: Enter a value between 2 and 200 in the Count column. This
value determines the number of times the sequence will be marked. In all
cases, the first sequence that reaches completion triggers acquisition and
the Bluetooth Protocol Analyzer will mark the following sequences in
the display.
4.
Click in the Error Name column and select a predefined bit position error
from the drop-down list box. See Figure 2--4.
Figure 2- 4: Error Name drop-down list box
5.
Click the
shortcut button adjacent to the Error Names to display the
custom error selection dialogs. See the examples in Figure 2--5.
Summary of Contents for BPA105
