Tektronix BPA105 User Manual Download | Manualshive

Page: 24 / 96

background image

Acquiring Piconet Packet Data

1- 12

BPA105 Bluetooth Protocol Analyzer User Manual -- COMPANY CONFIDENTIAL

1/2001

Acquisition Timeout.

In the Acquisition Setup dialog box (see Figure 1--2 on

page 1--2), use the Timeout (sec) field to set the number of seconds following
synchronization before the Bluetooth Protocol Analyzer loses synchronization if
there is no activity on the piconet. In such an event, the Bluetooth Protocol
Analyzer will display the message

Out of sync with piconet!

.

NOTE

. When you operate the Bluetooth Protocol Analyzer and Bluetooth

Neighborhood together to participant in a piconet, you must use Piconet mode.

When you operate the Bluetooth Protocol Analyzer in Independent Mode
working as a passive listener, you cannot use Bluetooth Neighborhood.

Sync Indication Bar.

When you select Independent mode as the logging mode, the

acquisition window displays a Sync Bar. See Figure 2--4.

The Sync Bar contains the following indicators:

H

Inquiry. This indicator is green when the Bluetooth Protocol Analyzer starts
the inquiry procedure during master inquiry or slave inquiry. The indicator
changes to red if the target device does not answer within a 60-second
timeout.

H

PageScan. This indicator is green when the Bluetooth Protocol Analyzer
enters the Page scan portion of the synchronization procedure. It is present
only if the slave inquiry or fake connection is selected. A timeout is not
included as part of this synchronization procedure, consequently, the user can
only stop the synchronization by clicking the toolbar Stop button.

H

Connect. This indicator is green when the Bluetooth Protocol Analyzer
enters the channel hopping sequence (the analyzer searches for first traffic on
the piconet). If no traffic is recorded, the indicator changes to red, indicating
that synchronization has failed.

H

In sync. This indicator turns green when the first packet of the channel
hopping sequence is received. If synchronization to the piconet is lost
(41-second timeout) the indicator changes to red, indicating that synchro-
nization to the piconet is lost.

Figure 1- 4: Acquisition window Sync Bar

«
...
22
23
24
25
26
...
»

Summary of Contents for BPA105

































































































Reviews:

No comments

Related manuals for BPA105

Brand: Olympus Pages: 12

Disklavier Mark III Series

Brand: Yamaha Pages: 39

Brand: horiba Pages: 175

Brand: Water I.D. Pages: 56

Brand: Meec tools Pages: 23

NetSure M832DNA

Brand: Vertiv Pages: 176

Brand: Kawai Pages: 110

Brand: MRC Pages: 14

Brand: Tonghui Pages: 65

Brand: Omega Pages: 16

Brand: A&D Pages: 10

Brand: sebaKMT Pages: 131

Brand: Hanna Instruments Pages: 12

Brand: Allen Organ Company Pages: 29

BlueForce Smart

Brand: CAME Pages: 24

Brand: wtw Pages: 52

Brand: RADWAG Pages: 12

Brand: Xsens Pages: 84

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands