Getting started
Installing and removing the module
Refer to the host instrument documentation or the
80X01, 80X02
Electrical Sampling Module Extender Instructions
for proper installation
and removal of modules and extender cables.
CAUTION.
Instrument modules are extremely static sensitive. Always
ground yourself when handling modules.
The module is designed to install directly into any available
small-module compartment of the following Tektronix mainframes:
DSA8300
CSA8200, DSA8200, TDS8200
NOTE.
Only one 82A04B module can be active in a mainframe at a time.
Connector care
Use extra care when attaching or removing SMA connectors. Use the
following guidelines to make proper connections:
1.
Align the connectors carefully before turning the nut.
2.
Use light
fi
nger pressure to lightly tighten the connection.
3.
Use a torque wrench to lightly tighten the nut as speci
fi
ed. (See
Table 1.) Use an open-end wrench to keep the body of the device
from turning.
4.
Rotate only the connector nut (not the cable) that you are tightening.
5.
Position the two wrenches within 90 degrees of each other before
applying force. (See Figure 1.)
6.
Hold the torque wrench lightly at the end of the handle.
7.
Apply downward force perpendicular to the wrench handle; this
applies torque to the connection through the wrench.
8.
Tighten the connection just to the point that the wrench breaks over.
Do not overtighten the connection.
82A04B User Manual
3
Summary of Contents for 82A04B
