![background image](http://html.mh-extra.com/html/tektronix/070-8811-08/070-8811-08_user-manual_1078783077.webp)
Reference
62
764 Digital Audio Monitor User Manual
Using the RS-232 Port
The primary use of the 764 RS-232 port is to output session reports.
The reports can be sent directly to any ASCII printer with serial
input, or captured on a PC and saved to disk.
The RS-232 port also supports remote control of 764 Digital Audio
Monitors with serial number B020000 and higher. To control the
instrument from a personal computer or ASCII terminal, connect it
as discussed under Cable Requirements and confirm the connection
by downloading a session report to the computer or terminal. Then
refer to the Remote Control Commands section, which begins on
page 66.
Cable Requirements
The 764 is an RS-232 DCE device. Table 15 lists the pin assignments
of the connector. When communicating with a DTE device that has a
male 9-pin (DB9) connector, use a cable that connects pins 2, 3, 5, 7,
and 8 straight-through (example: Tektronix part number
012-1445-00). To communicate with another DCE device, use a null
modem cable (which swaps the lines between pins 2 and 3 and pins 7
and 8). Figure 35 and Figure 36 illustrate cable wiring for communi-
cating with a device that has a 25-pin serial connector.
Table 15: RS-232 pin assignments
764 DB9 pin
Signal name
Signal direction
1
(optional)
—
2
RXD (Received Data)
From 764
3
TXD (Transmitted Data)
To 764
4
(optional)
—
5
Signal Ground
—
6
(optional)
—
7
RTS (Request to Send)
To 764
8
CTS (Clear to Send)
From 764
9
(optional)
—
Summary of Contents for 070-8811-08
