Deskew and Gain Cal Fixture Instructions
Deskew Fixture Instructions
7
4.
Position the probe tips to the solder pad locations with the appropriate
polarity. See Figures 7 and 8 on page 9.
5.
Firmly slide the probes forward until the probe tips make contact with the
SKEW ADJUST solder pads.
6.
Perform the following procedure to provide probe tip contact pressure with
the SKEW ADJUST solder pads: See Figure 9 on page 10.
a.
Pull back lightly on the probe holder assembly.
b.
While holding the probe holder assembly back, slide the probe forward
until the probe tips stick into the solder pads.
c.
Now carefully release the probe holder assembly. This will maintain
contact pressure.
d.
Perform substeps a through c for deskewing a second probe.
See Figure 8 on page 9.
7.
Proceed to
Using the Deskew Fixture to deskew channel
s, page 12.
