TEKTROL TEK-LCD 7801C Series Instruction Manual Download

Page: 42 / 106

Instruction Manual

Tek-LCD 7801C

www.tek-trol.com

Technology Solutions

•

Select the desired color and press Ok. Navigate to the other settings and make the necessary

changes.

•

Press Save to save the colour changes.

•

Press Select to apply the colour pattern to the channel. The Manage button is used to move

or delete colours.

6.9

Live Calibration

•

The Live Calibration feature is used to calibrate a channel by applying a live calibration signal.

•

From the Setup menu, navigate to the channel to be calibrated.

•

Go to Input 1 entry

box.

•

Apply Input 1 signal from sensor or calibrator.

•

Press & hold the Edit key and press the Live key a few time until a stable reading is displayed.

•

Release the Edit key; the input 1 value has been captured.

Summary of Contents for TEK-LCD 7801C Series











































































































Search results

Summary of Contents for TEK-LCD 7801C Series

Reviews:

Related manuals for TEK-LCD 7801C Series

Brands by name

Popular brands

TEKTROL TEK-LCD 7801C Series, Instruction Manual

Search results

Summary of Contents for TEK-LCD 7801C Series

Reviews:

Related manuals for TEK-LCD 7801C Series

Brands by name

Popular brands