MAKING ADJUSTMENTS
Remove position bolts and nuts. Leave pivot
bolt in place. Adjust to one of three desired
positions. Reinstall fasteners and tighten.
1
2
3
1
2
3
page 8
Pivot Bolt
Position Bolt
Guide Collar
Air Hose
Adjusting the Guide Collar
Adjusting the Guide Arm
1
2
1. Pull out 3-4 feet of hose and secure the hose
reel drum.
Locking gear will disengage when bolts
are removed! Secure drum before
removing bolts.
2. Remove the bolts connecting the guide arms
to the support legs.
Locking gear will disengage when bolts
are removed! Secure drum before
removing bolts.
3. Rotate guide arm to one of two positions.
Replace bolts and tighten.
1
2
3
4
Reinstall bolts
as shown.
TWO PEOPLE ARE RECOMMENDED FOR THIS PROCESS. During the course of this adjustment, the locking gear
will disengage and become ineffective. Ask a second person to hold the drum to prevent it from spinning while
removing and reinstalling the guide arm bolts.
Adjusting Hose Stopper Position
The hose stopper determines the length of hose that remains outside of reel. To adjust stopper position:
1. First pull hose out past the desired position of hose stopper. Lock drum in position.
2. Loosen (but do not remove) both stopper bolts just enough so stopper can slide along hose.
3. Move stopper to desired position. Tighten stopper bolts until hose stopper cannot slide. Do not overtighten bolts.
Desired length
of hose
Loosen but do not
remove bolts
