Kona Enterprise Gateway
T0007323_UG
Version 1.3
TEKTELIC Communications Inc.
Confidential
Page 11 of 15
2.4
Required Equipment for Installation
The following tools are required to install the Kona Enterprise Gateway module:
1.
A 6 point metric socket set and torque wrench drive.
2.
Anti-oxidant compound (NO-OX-ID, Penetrox, Noalox, Ox-Gard or equivalent).
3.
A small wire brush.
4.
A clean cloth.
5.
Weatherproofing tape kit for the RF connector (Scotch Wireless Weatherproofing Kit, WK-
101 recommended).
6.
Supplied pole mounting accessories (shown in Figure 6) for pole mounting or appropriate
screws or bolts (four sized M6) with any required anchors according to the wall
construction for wall mounting.
2.5
Kona Enterprise Gateway Mounting
Kona Enterprise Gateway PoE
must
be mounted to a vertical pole or wall using the supplied
mounting hardware which attaches to the back of the module as illustrated in 5. The vertical
orientation is required for the GPS to function properly.
