via GIUSEPPE DI VITTORIO 9
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW. TEKSET.IT
| RENT: LASER |
R
. . .
via NAZARIO SAURO 13/A
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW. TEKSETRENATAL.IT
| LASER |
Manual: RTI NEO ONE
page 13 / 48
f) The built-in ShowNET is controlled via Showeditor on a PC
Download and install the latest version of Laserworld Showeditor. The license is on the
ShowNET card of the RTI NEO ONE.
Details and software download on www.showeditor.com
g) The built-in ShowNET works as ILDA interface
First connect your laser show controller via ILDA with an external ShowNET network inter-
face. Then connect the external ShowNET interface via LAN with the integrated ShowNET
interface of the RTI NEO ONE.
Configuration details on www.laserworld.com/shownet
h) The built-in ShowNET works as playback unit
Select and trigger the saved patterns via DMX.
i) The built-in ShowNET runs in stand-alone mode
The saved patterns will be displayed by the RTI NEO ONE automatically.
Manual: RTI NEO ONE
page 14 / 48
By pressing the data wheel another time, you will enter the menu for setting the DMX
address of the RTI NEO ONE. Turn the data wheel left / right to select the desired DMX
starting address. Press the data wheel to confirm your selection.
After pressing the data wheel to select the DMX starting address of the RTI NEO ONE, you
will enter the menu for setting the DMX address of the ShowNET. Turn the data wheel
left / right to select the desired DMX starting address. Press the data wheel to confirm your
selection.
After pressing the data wheel to select the DMX starting address of the ShowNET, you will
enter the menu for setting the IP address of the ShowNET. First you will have to select
the third IP address block:
Press the data wheel to confirm your selection of the third block. Then you will have to
select the last two digits of the IP address:
Confirm your selection of the last two digits by pressing the data wheel.
