Tekram Technology P5T30-A4, User Manual

Page: 35 / 42

MAINBOARD BIOS SETUP MAINBOARD BIOS SETUP
P5T30-A4 User’s Manual P5T30-A4 User’s Manual
33 33
LOAD BIOS DEFAULTS
Loads “Fail Safe” settings into the BIOS Setup program. These options are designed to slow
the system down for troubleshooting purposes. To load the default values, highlight this
option and press [ENTER]. Enter “Y” in the confirmation screen and press [ENTER] again.
User-defined options in the
Standard CMOS Setup are not affected.
LOAD SETUP DEFAULTS
Loads the default values for best system performance into the BIOS Setup program. To load
the default values, highlight this option and press [ENTER]. Enter “Y” in the confirmation
screen and press [ENTER] again. User-defined options in the
Standard CMOS Setup are
not affected.
INTEGRATED PERIPHERALS SETUP
This menu is used to configure the integrated IDE subsystem and other peripherals.
IDE HDD Block Mode : Enabled
On-Chip Primary PCI IDE : Enabled
IDE Primary Master PIO : Auto
IDE Primary Slave PIO : Auto
IDE Primary Master UDMA : Auto
IDE Primary Slave UDMA : Auto
On-Chip Secondary PCI IDE : Enabled
IDE Secondary Master PIO : Auto
IDE Secondary Slave PIO : Auto
IDE Secondary Master UDMA : Auto
IDE Secondary Slave UDMA : Auto
Onboard FDD Controller : Enabled
Onboard Serial Port 1 : Auto
Onboard Serial Port 2 : Auto
InfraRed/COM2 Selected : UART COM2
ESC: Quit
↑ ↓ → ←
: Select
Onboard Parallel Port : 378/IRQ7 F1 : Help PU/PD/+/- : Modify
Onboard Parallel Mode : ECP/EPP F5 : Old Values (Shift) F2: Color
ECP Mode Use DMA : 3 F6 : Load BIOS Defaults
Parallel Port EPP Type : EPP 1.9 F7 : Load Setup Defaults
IDE HDD Block Mode - This allows your hard disk controller to use fast block mode to
transfer data to and from your hard disk drive (HDD). Enabled or Disabled . Enabled is the
default.
On-Chip Primary PCI IDE - Enables or Disables the primary controller. Situations where
this controller would be disabled are: a) You are not using any IDE Drives or b) You are
using an add-on IDE controller in a PCI Slot .
On-Chip Secondary PCI IDE - Enables or Disables the secondary controller. Situations
where this controller would be disabled are: a) You are not using any IDE Drives or b) You