Tekon PLUS TWP-4AI4DI1UT, Installation Manual

Page: 41 / 50

07
step
GATEWAY ANALOG OUTPUTS
41
INSTALLATION GUIDE PLUS TWP-4AI4DI1UT
04
Link Analog Output Index 1 (Gateway) to Analog Input 1 (Transmitter) and configure MB Add Link according to
the previous step. Set minimum and maximum values and click on Write
4000 (4mA)
20000 (20mA)
WIRELESS GATEWAY
Green led permanently on
during a closed current loop
Red led permanently on
during an open current loop
NOTE:
Output index 1 is linked to modbus address [9], according to mapping table of step 03.
Modbus address double word (float 32) value is converted into 4..20 mA scale according to minimum and
maximum defined values.