10
10
Cool only type has no HEAT mode.
SWING
MANUAL
OFF
ON
CANCEL
SET
SLEEP
FAN SPEED
OPERATION
MODE
I/O
TIME
MANUAL
SWING button
SWING button
ON TIMER button
OFF TIMER button
TIMER SET button
TIMER
CANCEL button
RESET pieces
Keep the remote controller within 6 metres in front of the indoor unit without any blockage.
If the air conditioner is not used for a long time, take the batteries out.
In this illustration, each section is shown with all its displays ON for the purpose of
explanation. Some models may not show all its indications.
NOTICE:
REMOTE CONTROL
Press it to change up/down air
flow direction and the deflector
automatically swings up and
down.
Please see
“
timer operation
Please see
“
timer operation
”.
Press it to fix timer setting.
Press it to cancel the timer
setting.
If the remote controller can’t
work normally, short the two
RESET pieces, it will be OK.
It sends signals to t he indoor unit.
(1) (2) (3) (4) (5)
Press it to change up/down air
flow direction and the deflector
moves at a certain angle. You
can change the moving angle
in the order of:
Signal ejecting window
TEMPERATURE
ADJUSTMENT buttons
RUN/STOP button
OPERATION DISPLAY
FAN SPEED button
OPERATION
MODE button
SLEEP button
COOL
HEAT
FAN
DRY
AUTO
Press once, the setting
temperature increases by
1
.
Press once, the setting
temperature decreases by
1
.
The range of setting
temperature is 16-31
.
It displays the current
settings.
Press it to select operation
mode:
Press it once to Start
operation and press again
to stop it.
Press it to change the fan speed
in the order of low-medium -high
-auto ( ).
Don't
tear the batteries apart or throw them into fire, which will lead to explosion.
Press it to start sleep running
and press again to stop it.
USINGCONDITIONER WITH REMOTE CONTROL
