11
3. Level ground
Place the
freezer
on a solid and flat ground (floor) to keep it stable, or else it will give
rise
to vibration and noise.
Unobstructed ventilation shall be maintained around the appliance or in an
embedded structure.
Preparations for use
1.
Standing time
After the
larder
is properly installed and well cleaned, do not switch it on
immediately.
Make sure you allow a minimum of 4 hours before turning on the power of
the
freezer
.
2.
Cleaning
Before use ensure you cleans the internal compartments and all shelves and accessories
with a soft cloth.
3.
Power-on
Insert the plug into the power socket to start the compressor. After 1 hour, open the
freezer
door, if the temperature inside the
larder
compartment drops obviously, it
indicates the
refrigeration system is working normally.
4.
Storage of food
After the
freezer
runs for a period of time, the internal temperature of the
freezer
will be
automatically controlled according to the user’s temperature setting.
Before storing foods
in your Freezer, turn the Freezer on and wait for 24 hours, to make sure it is working
properly and to allow the Freezer to reach the correct temperature
(Try to open the
freezer
door as less as possible before the internal
temperature cools
down).
If the
freezer
is installed in a moisture filled room, make sure to c
heck whether the ground
wire and leakage circuit breaker are normal. If vibration noises are produced due to the
freezer
making contact with the wall, or if the wall gets blackened by air convection around
the compressor, move the
larder
away from the wall. Setting up the
larder
may cause
jamming noise or image chaos to mobile phones, fixed-line telephone
, radio receiver,
television sets surrounding it, so try to keep the refrigerator as far away as possible from
these items.
