Defrosting
When the freezer operates for a long period of time,the surface of the evaporator and the
drawers may become covered with a layer of white frost. This frost will reduce the energy
efficiency of the unit, and make the freezer less effective. When this frost forms, it should be
promptly removed.
When defrosting, unplug the freezer, and remove all items from the freezer. Either allow the
frost to melt naturally from the warm air in the room, or carefully use a plastic scraper. Finally,
wipe away any remaining ice and water, plug the freezer in, and return
the food to the freezer.
CAUTION: Never use sharp tools to chip ice away.
After defrosting
you should clean the Fridge/Freezer internally with a weak solution of
bicarbonate of soda. Then rinse with warm water using a damp sponge or cloth and wipe dry.
Wash the baskets in warm soapy water and ensure they are completely dry before replacing in
the freezer.
1
7
If you require any technical guidance or find that the product is not operating as intended, please see the
Troubleshooting
section of this manual
Changing t
he internal lamp
Before carrying out the bulb replacement always press and turn the thermostat control to
dial to position “OFF”, then disconnecting the mains supply.
•
Hold and lift up the light bulb cover.
•
Remove the old bulb by unscrewing it in an anti-clockwise direction.
•
Replace with a new bulb (10W) by screwing it in a clockwise direction marking sure
that it is secure in the bulb holder.
•
Refit the light cover and re-connect your Fridge/Freezer to the mains supply and
switch on.
