background image

2 2

Guarantee

We, Teknix, undertake that if within 24 months of the date of purchase this appliance or any part thereof is proven to be defective by 

reason of mechanical or electrical failure we will at our discretion repair or replace the same free of any charge for labour, materials or 

carriage on condition that:

The appliance has been correctly installed in accordance to manufacturers’ instructions. 

The appliance has been used for normal domestic purposes only and in accordance with our operating instructions.

The appliance has not been repaired, taken apart or tampered with by any person not authorised by us.

All repair work under this guarantee must be undertaken by the organisation or its authorised agents

Proof of purchase is available on request

If we decide your appliance cannot be repaired, or is uneconomical to repair, we'll replace it with the same model. If that model 

is no longer available, we'll discuss an alternative settlement with you. 

We reserve the right to charge for the expense of a service call if no fault has been found with the appliance after we have 

inspected it.

All claims must be arranged via a call to us on 01759 487893.  Without pre-authorisation it may result in the cost of claim not 

being reimbursed. 

This guarantee is in addition to your statutory and other legal rights

 

-  Damage resulting from transportation, improper use, or neglect.

-  Appliance outside the United Kingdom.

-  Consumer replaceable items including, but not limited to, batteries, light bulbs and other consumables. 

-  Cosmetic damage and/or non-functional parts, which do not affect the normal use of the product including for example cabinet, 

scratches and rust. 

- - Any loss suffered as a result of not being able to use the

 

appliance or any loss other than the repair or the replacement cost of the 

product. 

-  Accidental or physical damage

Exclusions

Summary of Contents for T55F2W






















Reviews: