STEP 5: Drop Mounting Bracket assembly so Bolts engage into holes. To determine correct
location measure distance from face of Vertical Tube to the edge of Electrical Box as shown.
5.3"
C2
The distance between face of Panel Wall vertical tube and face of Electrical Box Cage has to be
4.5" for both Single and Double Power Box, for both left hand and right hand location.
4.5"
WARNING! *Do not connect to power source until installation is complete. *Connection to the building power source must be performed by a licensed electrician. *Not following these instruction
could result in damage and/or injury. *It is recommended that electrical connections be made under the supervision of a licensed electrician in accordance with applicable codes and regulations.
NOTE: If over Horizontal Tube
configuration is specified. Freestanding
Foot and Power Box CAN NOT
installed on the same side.
Section:
Description:
Page No:
Date:
INSTALLING POWER BOX ON HORIZONTAL TUBE
DETAIL
DIS_901a
7 of 11
Dec 2015
district
