TERMINOLOGY
The following terms are used throughout the manual, and are standard
terminology among detectorists.
ELIMINATION
Reference to a metal being "eliminated" means that the detector will not
emit a tone, nor display a Target-ID, when a metal object passes through
the searchcoil’s detection field.
DISCRIMINATION
When the detector emits different tones for different types of metals, and
when the detector "eliminates" certain metals, we refer to this as the
detector "discriminating" among different types of metals.
Discrimination is an important feature of professional metal detectors.
Discrimination allows the user to ignore trash and otherwise undesirable
objects.
RELIC
A relic is an object of interest by reason of its age or its association with
the past. Many relics are made of iron, but can also be made of bronze
or precious metals.
IRON
Iron is a common, low-grade metal that is an undesirable target in certain
metal detecting applications. Examples of undesirable iron objects are old
cans, pipes, bolts and nails.
Sometimes, the desired target is made of iron. Property markers, for
instance, contain iron. Valuable relics can also be composed of iron;
cannon balls, old armaments and parts of old structures and vehicles can
also be composed of iron.
FERROUS
Metals which are made of, or contain, iron.
PINPOINTING
Pinpointing is the process of finding the exact location of a buried object.
Long-buried metals can appear exactly like the surrounding soil, and can
therefore be very hard to isolate from the soil.
V.C.O.
Meaning “voltage controlled oscillator,” the V.C.O. audio method causes
both the audio pitch and the volume to rise as signal strength increases.
V.C.O. improves the user’s ability to interpret a target’s size and depth.
Very weak signals (for small or very deeply buried objects) have the
faintest volume and the lowest pitch. Larger objects, and those closer to
the searchcoil, will induce a higher volume and higher pitch sound.
GROUND BALANCE
Ground Balancing is the ability of the detector to ignore, or "see through,"
the earth’s naturally occurring minerals, and only sound a tone when a
metal object is detected. This detector incorporates proprietary circuitry to
eliminate false signals from severe ground conditions.
3
22
TROUBLESHOOTING GUIDE
SYMPTOM
CAUSE
SOLUTION
Detector chatters
• Using detector
• Use detector
or beeps erratically
indoors
outdoors only
• Using detector near
• Move away
power lines
from power lines
• Using 2 detectors in
• Keep 2 detectors
close proximity
at least 6 meters
(20’) apart
• Highly oxidized
• Only dig up
buried object
repeatable
signals
• Environmental
• Reduce sensitivity
electromagnetic
until erratic
interference
signals cease
Constant low tone
• Discharged battery
• Replace battery
or constant repeating
tones
• Wrong type of
• Use only 9V
battery
alkaline battery
LCD does not lock
• Multiple targets
• Move coil slowly
on to one Target-ID
present
at different angles
or detector emits
• Highly oxidized
multiple tones
target
• Sensitivity set
• Reduce sensitivity
too high
No power, no
• Dead battery
• Replace battery
sounds
• Cord not connected
securely
• Check connections
TROUBLESHOOTING